The Top Reasons Why People Succeed In The Repairs To Upvc Windows Industry
The Top Reasons Why People Succeed In The Repairs To Upvc Windows Industry
Blog Article
Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.
Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to make sure that your windows are in good condition.
Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation you'll need to find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.
If you are going to attempt to remove the window panes yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor and could be trampled under.
It's a great idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your property until a professional comes out to fix the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as this will offer the best of both worlds.
2. Sagging
Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sagging. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.
To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window to access the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to secure them in the right position.
If you can't reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, which causes them to loose their elasticity. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.
uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it can also be caused by the handle mechanism getting worn out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to close the window and then perform a test fit. The joints at the corners of the sash must align with the joint on the casing. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the get more info mechanism back into position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.
This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking might need to be removed. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and reduce your energy efficiency.
Check that any drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.
Other indicators of water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.
If the leakage occurs between the double-glazed glass, it is more likely the issue is with the seal rather than the frame. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and open in a breeze It could be hinges that are at fault. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.
Like any mechanical part, hinges can wear out over time. It is very easy to change a window hinge, but it's easier if someone helps you to hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.
The issue could be caused either by opening the window incorrectly or a faulty installation at the factory. Sending us a picture via our website is often enough to resolve the problem. We are more than happy to offer advice.
Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by a variety of different causes. The hinges, also due to wear and tear could become misaligned. This causes gaps to develop between the sash and the frame. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge of the window and can also be misaligned, and again it is possible to give them a clean but in some instances it could be necessary to get them replaced.
The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and will reduce the possibility of draughts.
Another method of reducing the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be placed over your window sill. These will help to block out cold air and keep your home warm and cozy!
The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is essential to remember that all windows will eventually wear out and it is cheaper to replace them than to repair them. So, if you're having issues with your upvc windows, it is recommended to seek help from a professional immediately.